smithy
|
 |
« Reply #45 on: July 14, 2010, 15:42:58 » |
|
Cut the journos some slack d_m. 90mph doesn't have quite the 'impact' as 120mph.  do you mean at more than 120mph? 
|
|
|
Logged
|
|
|
|
Gordon the Blue Engine
|
 |
« Reply #46 on: July 14, 2010, 21:02:28 » |
|
Quoting a knowledgeable source: "The CCB tripped on the leading power car so all the WSPs turned off" So who was this knowledgeable source? Reprofiling 32 wheelsets (ie 8 trailers X 4 wheelsets/ vehicle) will cost FGW▸ a fair bit - I'm sure they would like to know exactly why this damage occurred. And If I was MD of FGW I would like a bit more of an explanation than a "CCB tripped".
|
|
|
Logged
|
|
|
|
smithy
|
 |
« Reply #47 on: July 14, 2010, 21:28:12 » |
|
Quoting a knowledgeable source: "The CCB tripped on the leading power car so all the WSPs turned off" So who was this knowledgeable source? Reprofiling 32 wheelsets (ie 8 trailers X 4 wheelsets/ vehicle) will cost FGW▸ a fair bit - I'm sure they would like to know exactly why this damage occurred. And If I was MD of FGW I would like a bit more of an explanation than a "CCB tripped". if you saw the state of the wiring in and around desk then you would understand why the MCB▸ tripped,dont forget the 4 wheelsets per power car also need turning. as for MD of FGW needing more of an explanation than CCb tripped believe me they will get more than that,it will not be the sort of info that should be in public domain though. I would also hazard a guess FGW will claim costs back from somewhere else probably NR» in first instance???
|
|
|
Logged
|
|
|
|
Chris from Nailsea
|
 |
« Reply #48 on: July 14, 2010, 21:44:44 » |
|
I would also hazard a guess FGW▸ will claim costs back from somewhere else probably NR» in first instance???
From The (Plymouth) Herald (13/07/2010): Network Rail, which said the tree belonged to a local landowner, said it was "taking this matter seriously".
|
|
|
Logged
|
William Huskisson MP▸ was the first person to be killed by a train while crossing the tracks, in 1830. Many more have died in the same way since then. Don't take a chance: Stop, Look, Listen.
"Level crossings are safe, unless they are used in an unsafe manner." Discuss.
|
|
|
Sprog
|
 |
« Reply #49 on: July 14, 2010, 22:48:19 » |
|
Quoting a knowledgeable source: "The CCB tripped on the leading power car so all the WSPs turned off"
XThis situation is not possible, as each vehicle has an individual WSP system and whilst on 'other' forums, it has been claimed that the CCB tripped in the leading power car which (as has already been commented upon) is not surprising considering that the desk has been destroyed inevitably causing electrical shorts, this would have only disabled the WSP system in the leading powercar, not throughout the train. The flats (Burns is probably a more appropriate word) were caused by...how can i put it...a slight operational error when the set was being rescued, but considering the unusual circumstances and the pressure to recover the stricken set, it is understandable.
|
|
« Last Edit: July 14, 2010, 23:04:48 by Sprog »
|
Logged
|
|
|
|
Sprog
|
 |
« Reply #50 on: July 14, 2010, 23:04:03 » |
|
BTW▸ , sorry for double post, for the benefit of the 'norms' here who like their acronyms to be explained, CCB = Control Circuit Breaker, which is part of the large bank of breakers fitted to the Electrical Control Cubicle inside a power car.
As the name suggests, the CCB protects the 110V supply to the various control systems within the powercar, such as the WSP system, Control Modules & Control circuits.
For future reference, excuse any typos this is all from memory!!
CCB - Control Circuit Breaker CMCB - Compressor Circuit Breaker FCB - Fire system Circuit Breaker BMCB1 - Blower Motor Circuit Breaker (For #1 & #2 Traction Motors) BMCB2 - Blower Motor Circuit Breaker (For #3 & #4 Tracion Motors) FPCB - Fuel Pump Circuit Breaker LCB1 - Lighting Circuit Breaker (1) LCB2 - Lighting Circuit Breaker (2) EFCB - Extractor Fan Circuit Breaker BCB - Battery Charger Circuit Breaker BCCB - Brake Control Circuit Breaker PACB - Public Address Circuit Breaker HCB1 - Heating Circuit Breaker (1) HCB2 - Heating Circuit Breaker (2) TPWSCB - Train Protection & Warning System Circuit Breaker TSCB - Train Supply Circuit Breaker PHCB - Pre-Heater Circuit Breaker (Replaced the NRNCB - National Radio Circuit Braker)
|
|
« Last Edit: July 14, 2010, 23:15:36 by Sprog »
|
Logged
|
|
|
|
Chris from Nailsea
|
 |
« Reply #51 on: July 14, 2010, 23:10:52 » |
|
Thanks very much for that helpful explanation, Sprog! I won't add all of these to our ' acronyms and abbreviations' page, as hopefully we won't see too many of them being 'tripped' in future? C. 
|
|
|
Logged
|
William Huskisson MP▸ was the first person to be killed by a train while crossing the tracks, in 1830. Many more have died in the same way since then. Don't take a chance: Stop, Look, Listen.
"Level crossings are safe, unless they are used in an unsafe manner." Discuss.
|
|
|
JayMac
|
 |
« Reply #52 on: July 15, 2010, 00:22:39 » |
|
Thanks for that insight into the 'gubbins' on a HST▸ power car, Sprog.
I take it 43041 is in St Phillips Marsh at the moment. Will repairs and fitting of a replacement cab be undertaken there or is the PC likely to be removed to another TMD▸ ?
|
|
|
Logged
|
"Good news for regular users of Euston Station in London! One day they will die. Then they won't have to go to Euston Station ever again." - David Mitchell
|
|
|
The SprinterMeister
|
 |
« Reply #53 on: July 15, 2010, 09:10:54 » |
|
Quoting a knowledgeable source: "The CCB tripped on the leading power car so all the WSPs turned off" So who was this knowledgeable source? Reprofiling 32 wheelsets (ie 8 trailers X 4 wheelsets/ vehicle) will cost FGW▸ a fair bit - I'm sure they would like to know exactly why this damage occurred. And If I was MD of FGW I would like a bit more of an explanation than a "CCB tripped". When the Control Circuit Breaker trips in the leading cab this has a simalar effect to shutting down the cab and removing the master key from the F&R switch. As there is no requirement for the Wheel Slip / Slide system to be operative when the desk is switched out and the set stationary WSP's on all vehicles is disabled by removal of the feed from one of the train lines fed from the driving cab via the Control Circuit Breaker. Although Rail conditions were good on Saturday it is likely that leaves displaced from the tree initiated wheelslide which by virtue of the damage to the front cab and CCB tripping couldn't be avoided. The informed source (I see a quote from '50031' on WNXX▸ has been used) maintains them for a living so should have some knowledge of what he is talking about..... 
|
|
|
Logged
|
Trundling gently round the SW
|
|
|
The SprinterMeister
|
 |
« Reply #54 on: July 15, 2010, 10:00:13 » |
|
I would also hazard a guess FGW▸ will claim costs back from somewhere else probably NR» in first instance???
As I understand things the tree was situated in private land outside of the railway boundary line. Examination of some of the photographs reveal that parts of the tree found in the cab appear to be dead / rotten and I understand the landowner has already been interviewed by BTP▸ . http://tomcurtisrailgallery.fotopic.net/p65868283.html
|
|
« Last Edit: July 15, 2010, 10:08:45 by The SprinterMeister »
|
Logged
|
Trundling gently round the SW
|
|
|
The SprinterMeister
|
 |
« Reply #55 on: July 15, 2010, 10:06:05 » |
|
Thanks for that insight into the 'gubbins' on a HST▸ power car, Sprog.
I take it 43041 is in St Phillips Marsh at the moment. Will repairs and fitting of a replacement cab be undertaken there or is the PC likely to be removed to another TMD▸ ?
Finding another serviceable cab to put on it will probably be more of an issue. From what I gather from elsewhere there is only one cab not attached to a powercar (which is itself damaged) and the moulds used to manufacture the cabs are not currently useable.
|
|
|
Logged
|
Trundling gently round the SW
|
|
|
LiskeardRich
|
 |
« Reply #56 on: July 15, 2010, 11:00:45 » |
|
Thanks for that insight into the 'gubbins' on a HST▸ power car, Sprog.
I take it 43041 is in St Phillips Marsh at the moment. Will repairs and fitting of a replacement cab be undertaken there or is the PC likely to be removed to another TMD▸ ?
Finding another serviceable cab to put on it will probably be more of an issue. From what I gather from elsewhere there is only one cab not attached to a powercar (which is itself damaged) and the moulds used to manufacture the cabs are not currently useable. there is currently 2 cabs in DML in Plymouth for refurbishment i believe!
|
|
|
Logged
|
All posts are my own personal believes, opinions and understandings!
|
|
|
The SprinterMeister
|
 |
« Reply #57 on: July 15, 2010, 11:37:03 » |
|
there is currently 2 cabs in DML in Plymouth for refurbishment i believe!
Correct. Those two cabs are off / for Grand Central power cars which are currently in Brush for fitting of MTU▸ engines. The cabs are being refurbished under subcontract by Babcock Marine (the former DML).
|
|
|
Logged
|
Trundling gently round the SW
|
|
|
LiskeardRich
|
 |
« Reply #58 on: July 15, 2010, 11:47:16 » |
|
there is currently 2 cabs in DML in Plymouth for refurbishment i believe!
Correct. Those two cabs are off / for Grand Central power cars which are currently in Brush for fitting of MTU▸ engines. The cabs are being refurbished under subcontract by Babcock Marine (the former DML). would this mean there are cabs available spare when these refurbishments are complete, or are they not available being Grand Central cabs?
|
|
|
Logged
|
All posts are my own personal believes, opinions and understandings!
|
|
|
The SprinterMeister
|
 |
« Reply #59 on: July 15, 2010, 12:01:43 » |
|
would this mean there are cabs available spare when these refurbishments are complete, or are they not available being Grand Central cabs?
What it means is that there are two power cars (43068 & 43080 I believe) standing in Brush Loughborough without cabs on them awaiting return of the two cabs from Babcock Marine. http://staceys-fots.fotopic.net/p65434734.htmlThe two power cars are buffer fitted examples but this has no practical difference as far as the cab module itself is concerned.
|
|
« Last Edit: July 15, 2010, 12:09:20 by The SprinterMeister »
|
Logged
|
Trundling gently round the SW
|
|
|
|